Teton Summit Series 400x75.5x74 T5 Tread Premium Rubber Track
Teton Summit Series 400x75.5x74 T5 Tread Premium Rubber Track
This Teton Summit Series 400x75.5x74 rubber track is an OEM-compatible replacement built to exact factory specifications. It measures 400mm wide, with a 75.5mm pitch and 74 links. Sold individually.
Teton Tracks supplies OEM-spec rubber tracks with fitment verified against your exact machine. Every track ships free to the contiguous United States, backed by a 24-month manufacturer defect warranty honored by Teton - order with confidence.
Specifications
| Track Size | 400x75.5x74 |
| Width | 400 mm |
| Pitch | 75.5 mm |
| Link Count | 74 |
| Tread Pattern | T5 Tread |
| Compatible Machines | Fits 30 machine models |
What Goes Into Every Teton Summit Series Rubber Track
Every Teton Summit Series rubber track is engineered with a multi-layer construction system designed for maximum service life under real jobsite conditions.
- Continuous Steel Cord Belt - A single continuously wound steel cable runs the full length of the track, eliminating splice points that cause premature failure - the same belting method used in OEM tracks.
- High-Tensile Steel Links - Drop-forged steel links engage cleanly with your machine's sprocket for smooth power transfer and reduced undercarriage wear.
- 100% Virgin Rubber Compound - Steel cords are bonded through multi-stage vulcanization. No reclaimed or recycled rubber. The result is a track body that resists delamination, cracking, and chunking under sustained heavy loads.
- UV and Ozone Stabilizers - Built-in antioxidants and antiozonants protect against sun and weather degradation, extending track life for machines that sit outdoors between jobs.
Track Care: Getting the Most Hours from Your Teton Summit Series Tracks
- Tension Check - Check track tension at the start of every shift. Over-tensioned tracks accelerate wear on sprockets and idlers; under-tensioned tracks risk derailment. Refer to your operator manual for the correct sag measurement.
- Clean the Undercarriage - Packed mud, rocks, and debris add weight, increase fuel consumption, and cause uneven wear. Hose out the undercarriage at the end of each day, especially in clay or mud conditions.
- Inspect Wear Indicators - Look for cracking between lugs, exposed steel cords, uneven lug height, and missing chunks. If the rubber between lugs is worn to less than 1/4 inch, it is time to replace.
- Rotate Travel Direction - When possible, alternate the direction your machine travels on repetitive routes to distribute wear more evenly across the track surface.
You may also like
Key Features
- Precision-built to 400mm width, 75.5mm pitch, 74 links for an exact OEM-spec fit.
- Continuous steel-cord belt and 100% virgin rubber compound for long service life.
- Ships free to the contiguous United States, backed by a 24-month manufacturer defect warranty honored by Teton.
Specifications
| Track Size | 400x75.5x74 |
| Width | 400 mm |
| Pitch | 75.5 mm |
| Link Count | 74 |
| Tread Pattern | T5 Tread |
| Compatible Machines | Fits 30 machine models |
This 400x75.5x74 rubber track is fitment-verified for 30 compatible machine models.
Tread Pattern: T5 Tread
T5 lug profile engineered for maximum durability and grip on abrasive surfaces including rock, concrete, and demolition debris.
Best for: Demolition, Dirt, Mud, Rock, Sand
What Goes Into Every Teton Summit Series Rubber Track
Every Teton Summit Series rubber track is engineered with a multi-layer construction system designed for maximum service life under real jobsite conditions.
- Continuous Steel Cord Belt - A single continuously wound steel cable runs the full length of the track, eliminating splice points that cause premature failure - the same belting method used in OEM tracks.
- High-Tensile Steel Links - Drop-forged steel links engage cleanly with your machine's sprocket for smooth power transfer and reduced undercarriage wear.
- 100% Virgin Rubber Compound - Steel cords are bonded through multi-stage vulcanization. No reclaimed or recycled rubber. The result is a track body that resists delamination, cracking, and chunking under sustained heavy loads.
- UV and Ozone Stabilizers - Built-in antioxidants and antiozonants protect against sun and weather degradation, extending track life for machines that sit outdoors between jobs.
Track Care: Getting the Most Hours from Your Teton Summit Series Tracks
- Tension Check - Check track tension at the start of every shift. Over-tensioned tracks accelerate wear on sprockets and idlers; under-tensioned tracks risk derailment. Refer to your operator manual for the correct sag measurement.
- Clean the Undercarriage - Packed mud, rocks, and debris add weight, increase fuel consumption, and cause uneven wear. Hose out the undercarriage at the end of each day, especially in clay or mud conditions.
- Inspect Wear Indicators - Look for cracking between lugs, exposed steel cords, uneven lug height, and missing chunks. If the rubber between lugs is worn to less than 1/4 inch, it is time to replace.
- Rotate Travel Direction - When possible, alternate the direction your machine travels on repetitive routes to distribute wear more evenly across the track surface.
Free Shipping
Every Teton Summit Series rubber track ships free to the contiguous United States, shipped from our warehouse network.
Easy Returns
Ordered the wrong size? Return an unused track in its original condition - our team helps confirm the exact fit for your machine before and after purchase.
24-Month Warranty
Every track is backed by a 24-month manufacturer defect warranty honored by Teton, so you can put it to work with confidence.