Teton Summit Series B400X86X50Q Snow Tread Premium Rubber Track
Teton Summit Series B400X86X50Q Snow Tread Premium Rubber Track
This Teton Summit Series B400X86X50Q rubber track is an OEM-compatible replacement built to exact factory specifications. It measures 400mm wide, with a 86mm pitch and 50 links. Sold individually.
Teton Tracks supplies OEM-spec rubber tracks with fitment verified against your exact machine. Every track ships free to the contiguous United States, backed by a 24-month manufacturer defect warranty honored by Teton - order with confidence.
Specifications
| Track Size | B400X86X50Q |
| Width | 400 mm |
| Pitch | 86 mm |
| Link Count | 50 |
| Tread Pattern | Snow Tread |
| Guide | B Guide |
| Compatible Machines | Fits 10 machine models |
What Goes Into Every Teton Summit Series Rubber Track
Every Teton Summit Series rubber track is engineered with a multi-layer construction system designed for maximum service life under real jobsite conditions.
- Continuous Steel Cord Belt - A single continuously wound steel cable runs the full length of the track, eliminating splice points that cause premature failure - the same belting method used in OEM tracks.
- High-Tensile Steel Links - Drop-forged steel links engage cleanly with your machine's sprocket for smooth power transfer and reduced undercarriage wear.
- 100% Virgin Rubber Compound - Steel cords are bonded through multi-stage vulcanization. No reclaimed or recycled rubber. The result is a track body that resists delamination, cracking, and chunking under sustained heavy loads.
- UV and Ozone Stabilizers - Built-in antioxidants and antiozonants protect against sun and weather degradation, extending track life for machines that sit outdoors between jobs.
Track Care: Getting the Most Hours from Your Teton Summit Series Tracks
- Tension Check - Check track tension at the start of every shift. Over-tensioned tracks accelerate wear on sprockets and idlers; under-tensioned tracks risk derailment. Refer to your operator manual for the correct sag measurement.
- Clean the Undercarriage - Packed mud, rocks, and debris add weight, increase fuel consumption, and cause uneven wear. Hose out the undercarriage at the end of each day, especially in clay or mud conditions.
- Inspect Wear Indicators - Look for cracking between lugs, exposed steel cords, uneven lug height, and missing chunks. If the rubber between lugs is worn to less than 1/4 inch, it is time to replace.
- Rotate Travel Direction - When possible, alternate the direction your machine travels on repetitive routes to distribute wear more evenly across the track surface.
You may also like
Key Features
- Precision-built to 400mm width, 86mm pitch, 50 links for an exact OEM-spec fit.
- Continuous steel-cord belt and 100% virgin rubber compound for long service life.
- Ships free to the contiguous United States, backed by a 24-month manufacturer defect warranty honored by Teton.
Specifications
| Track Size | B400X86X50Q |
| Width | 400 mm |
| Pitch | 86 mm |
| Link Count | 50 |
| Tread Pattern | Snow Tread |
| Guide | B Guide |
| Compatible Machines | Fits 10 machine models |
This B400X86X50Q rubber track is fitment-verified for 10 compatible machine models.
Tread Pattern: Snow Tread
Specialized pattern designed for snow and ice conditions. Deep grooves channel slush while aggressive lugs bite into packed snow.
Best for: Snow
What Goes Into Every Teton Summit Series Rubber Track
Every Teton Summit Series rubber track is engineered with a multi-layer construction system designed for maximum service life under real jobsite conditions.
- Continuous Steel Cord Belt - A single continuously wound steel cable runs the full length of the track, eliminating splice points that cause premature failure - the same belting method used in OEM tracks.
- High-Tensile Steel Links - Drop-forged steel links engage cleanly with your machine's sprocket for smooth power transfer and reduced undercarriage wear.
- 100% Virgin Rubber Compound - Steel cords are bonded through multi-stage vulcanization. No reclaimed or recycled rubber. The result is a track body that resists delamination, cracking, and chunking under sustained heavy loads.
- UV and Ozone Stabilizers - Built-in antioxidants and antiozonants protect against sun and weather degradation, extending track life for machines that sit outdoors between jobs.
Track Care: Getting the Most Hours from Your Teton Summit Series Tracks
- Tension Check - Check track tension at the start of every shift. Over-tensioned tracks accelerate wear on sprockets and idlers; under-tensioned tracks risk derailment. Refer to your operator manual for the correct sag measurement.
- Clean the Undercarriage - Packed mud, rocks, and debris add weight, increase fuel consumption, and cause uneven wear. Hose out the undercarriage at the end of each day, especially in clay or mud conditions.
- Inspect Wear Indicators - Look for cracking between lugs, exposed steel cords, uneven lug height, and missing chunks. If the rubber between lugs is worn to less than 1/4 inch, it is time to replace.
- Rotate Travel Direction - When possible, alternate the direction your machine travels on repetitive routes to distribute wear more evenly across the track surface.
Free Shipping
Every Teton Summit Series rubber track ships free to the contiguous United States, shipped from our warehouse network.
Easy Returns
Ordered the wrong size? Return an unused track in its original condition - our team helps confirm the exact fit for your machine before and after purchase.
24-Month Warranty
Every track is backed by a 24-month manufacturer defect warranty honored by Teton, so you can put it to work with confidence.